Showing posts with label Special Topics In Geographic Science. Show all posts
Showing posts with label Special Topics In Geographic Science. Show all posts

Saturday, September 5, 2026

Module 2.1 Lab: Surfaces - TINs and DEMs

 


Figure 1: Comparison of TIN (Top) and DEM (Bottom) Contours

This week I explored two different elevation data models in ArcGIS Pro: a TIN surface created from mass points and a DEM generated using Spline interpolation. Working with both helped me understand how the same elevation dataset can produce different representations of terrain. The TIN model captured sharp, localized changes in elevation because each triangle is built directly from the original sample points. The DEM produced a smoother and more continuous surface, especially in areas where interpolation fills in gaps between points.

Comparing the contour lines made these differences easy to see. The TIN contours showed angular transitions that closely followed the elevation points, while the DEM contours were more rounded and gradual. Overlaying the elevation points on the DEM helped me visualize how point density and interpolation influence the final surface. Overall, this exercise showed the strengths of each model and how they can be used depending on the level of detail needed.

Thursday, August 27, 2026

Module 1.3: Data Quality - Assessment

 

Figure 1: Percentage difference in road network completeness between Tiger Road and Street Centerlines, separated by grid cell to show spatial variation network completeness.

The goal of this lab was to evaluate the horizontal accuracy and completeness of two road network dataset, county Street Centerlines and Tiger Roads, using a grid‑based comparison approach. By measuring how much road length each dataset contained within every grid cell, we were able to identify where the networks aligned closely and where one was significantly more complete than the other. This type of assessment is important for understanding data reliability, especially when road networks are used for routing, emergency response, or spatial modeling.

To complete the analysis, I first clipped both road datasets to the county boundary and intersected them with the grid so that each road segment was split and assigned to the correct grid polygon. After calculating segment lengths in kilometers, I summarized total road length per grid using the grid code field as the unique identifier. These per‑grid totals allowed me to compute percentage differences between the two networks and classify which dataset was more complete in each cell. Finally, I created a graduated‑color map using to visualize spatial patterns in completeness across the county.



Saturday, August 22, 2026

Module 1.1 Lab: Calculating Metrics for Spatial Data Quality


The horizontal precision of 68% was 4.5 m.

The distance between the average waypoint location and reference point was 3.2 m; horizontal accuracy.

 

The estimated horizontal accuracy was 3.2 m, based on the distance between the average waypoint location and the reference point. The 68% horizontal precision was 4.5 m. Therefore, the horizontal accuracy error was 1.3 m smaller than the 68% precision estimate. The average GPS position was closer to the reference location than the distance representing the spread of 68% of the repeated observations. Based on these results, the difference between horizontal accuracy and precision does not appear substantial.

 

Vertical Accuracy at 68% was 5.96 m.

The vertical precision is 5.9 m.

The difference between these two values is only approximately 0.07 m, indicating that vertical accuracy error and vertical precision are very similar.

Overall, the results do not provide strong evidence of significant horizontal bias because the 3.2 m displacement of the average waypoint from the reference point is smaller than the 4.5 m horizontal precision estimate.

Vertically, the average GPS elevation was 5.96 m higher than the reference elevation, which indicates a positive vertical offset. However, because the 68% vertical precision was also approximately 5.9 m, the magnitude of this offset is similar to the variability observed among the elevation measurements. Therefore, the results should be interpreted cautiously rather than as evidence of a strong systematic bias.


Mod 1 - Wireframes, HTML/CSS Discussion

  My proposed Web GIS is a Post-Disaster Facility Assessment Web GIS designed to support Incident Command personnel during hurricane and dis...